How to Write a CRediT Author Contribution Statement

Updated October 23, 2026
Grid of the 14 CRediT roles with dots for the roles held by three fictional authors, A. Bello, C. Wei and L. Ortiz

CRediT replaces vague claims that everyone contributed equally with a structured account of who did what, but the roles still need evidence and group agreement.

Key point: Use CRediT to describe contributions, not to decide authorship: apply the journal's authorship criteria separately, then have every author approve the final statement.

What CRediT does—and what it does not do

The Contributor Roles Taxonomy, usually called CRediT, provides 14 standard labels for work behind a research output. Its purpose is to make contributions transparent and machine-readable. Instead of “A.B. and C.D. contributed to the study,” a statement can show that A.B. developed the methodology and software, while C.D. conducted the investigation and curated the data.

CRediT was formalised as ANSI/NISO Z39.104-2022 and is maintained through NISO's CRediT governance following its development as a community taxonomy. The standard states plainly that “CRediT roles define contributorship, not authorship.” It also lists the roles without any order of importance, so do not read them as a ranking. Data curation is not inherently below conceptualization, and software is not merely technical assistance.

That distinction matters in medical publishing. The ICMJE authorship recommendations require all four criteria: substantial contributions to the conception or design of the work, or to the acquisition, analysis or interpretation of data; drafting the work or reviewing it critically for important intellectual content; final approval of the version to be published; and agreement to be accountable for all aspects of the work. A person might qualify for the CRediT role Funding acquisition but not meet all four criteria. Another might make a substantial Software contribution and qualify after joining critical revision, approval and accountability. Apply the authorship standard first or alongside the role exercise, never by counting roles.

This guide is about producing the statement itself. For deciding the byline or mediating a disagreement, use the separate guide to handling authorship disputes.

Know the 14 roles before assigning them

Use the official definitions, not what a label seems to mean in ordinary conversation. The table below paraphrases them.

CRediT role Work it commonly covers
Conceptualization Formulating or developing the overarching research goals and aims
Methodology Developing or designing methods and models
Software Programming, implementing code, testing code components or algorithms
Validation Verifying the replication or reproducibility of results or outputs
Formal analysis Applying statistical, mathematical, computational or other formal techniques
Investigation Performing experiments or collecting data and evidence
Resources Providing study materials, samples, instruments, patients or computing resources
Data curation Annotating (producing metadata), scrubbing and maintaining research data for initial use and later re-use
Writing – original draft Writing the initial draft of the published work, including substantive translation
Writing – review & editing Critically reviewing, commenting on or revising the work
Visualization Preparing published visual presentation of data
Supervision Oversight and leadership for research planning and execution
Project administration Coordinating and managing research activity
Funding acquisition Acquiring financial support for the project

Some terms are easy to overextend. “Validation” does not mean that every co-author read the final paper; it concerns verification of results or outputs. “Resources” is not a courtesy label for the head of a unit. “Writing – review & editing” should represent substantive intellectual revision, not merely approving an email. “Supervision” describes oversight of the research activity, but general supervision alone does not satisfy ICMJE authorship.

CRediT permits multiple roles per person and multiple people per role. Where several people share a role, section 3.2.2 of the standard lists an optional specification: the degree of contribution may be given as lead, equal or supporting. Each publisher decides whether to request it. Use these qualifiers only when the target journal requests or accepts them and the group can defend the distinction. An equal qualifier applies within a stated role, not automatically across the entire paper.

Role boundaries can overlap without being redundant. A researcher who designs an analysis can hold Methodology, while the person who runs it holds Formal analysis; one person may hold both. Data curation covers making data usable and maintainable, while Formal analysis covers applying techniques to answer the research question. Ask what output each role produced when the distinction is unclear. If the team still cannot explain a label in one sentence, leave it out until the work record supports it. Accurate incompleteness is better than an exhaustive statement built from guesses.

Build the statement from evidence

Start with project records rather than a blank contribution box. Useful evidence includes a protocol version history, laboratory notebook, data-management log, repository commits, analysis scripts, figure files, meeting decisions and tracked manuscript changes. The goal is not forensic accounting. It is to avoid a deadline conversation driven by memory and seniority.

Create a worksheet with contributors as rows and the 14 roles as columns. Ask each person to mark the roles they believe apply and add one concrete output under each mark. “Formal analysis: wrote and checked the survival-analysis scripts” is reviewable. “Helped throughout” is not.

Use this decision test for every proposed role:

  1. Can the contributor identify a concrete task or output?
  2. Does that task fit the official definition?
  3. Can another team member verify it?
  4. Is the role still accurate after the final revision?
  5. If an optional qualifier is requested, can the team explain why?

Then discuss the worksheet together. Self-reporting catches work a lead author may never have seen, especially data curation and software. Group review catches misunderstandings and duplicate descriptions. The corresponding author can coordinate this process, but should not assign everyone’s roles unilaterally.

Use names consistently with the manuscript and ORCID records. The practical checks in ORCID, affiliations and authorship prevent initials, name variants and affiliations from drifting between the title page and submission system.

Separate role mapping from authorship eligibility

Run a second, explicit check against the target journal’s authorship policy. A CRediT worksheet answers “What did this person do?” The policy answers “Does this contribution, together with the other required responsibilities, qualify this person for the byline?”

Situation Correct handling
Statistician designed and performed the analysis, revised the paper, approved it and accepts accountability Consider authorship under the journal’s criteria; record Methodology and Formal analysis
Department chair provided space but did not contribute intellectually Do not add as author; Resources may be acknowledged if accurate and permission is obtained
Medical writer drafted text under author direction but does not accept author accountability Disclose and acknowledge the writing assistance and funding; do not hide it in an author statement
Research assistant collected samples but had no role in drafting or critical revision Invite appropriate intellectual participation if authorship is warranted; otherwise acknowledge Investigation

ICMJE says contributors who meet the first criterion should be given the opportunity to participate in review, drafting and final approval. That guards against excluding junior researchers by withholding the tasks they need to complete the criteria. It does not mean every person who performs one task must become an author.

It also guards against guest authorship. A senior name cannot be made legitimate by assigning Supervision and Funding acquisition after the fact. If a contribution did not happen, no taxonomy label fixes it.

Format a statement journals can use

Follow the target journal’s punctuation and name format. A concise statement can read:

Amina Bello: Conceptualization, Methodology, Writing – original draft, Project administration. Chen Wei: Software, Formal analysis, Visualization, Writing – review & editing. Lila Ortiz: Investigation, Data curation, Validation, Writing – review & editing. All authors approved the final manuscript and accept accountability for the work.

If a journal requests the optional degree-of-contribution qualifiers:

Writing – review & editing: Chen Wei (lead), Lila Ortiz (supporting).

Qualifiers apply only to a role held by more than one person. In the statement above, that is Writing – review & editing.

Do not blend acknowledgments, funding disclosures and competing interests into this statement unless the journal explicitly asks. They answer different questions and often appear in different metadata fields. Our guide to ICMJE conflict-of-interest disclosure covers the relationships statement separately.

Avoid these common formulations:

Weak wording Why it fails Better approach
“All authors contributed equally” It hides which work was equal and may be untrue Name standard roles; add an equality qualifier only if the journal requests it
“A.B. did the statistics” It is vague and not standardised “A.B.: Formal analysis, Validation” if both definitions fit
Every author assigned every role It is rarely credible and erases specialised work Assign only roles supported by a concrete contribution
Funding acquisition treated as authorship A role is not an eligibility rule Apply the journal’s authorship criteria separately

Approve and maintain the record

Circulate the exact statement with the final manuscript. Ask every author to confirm three things in writing: their own roles are accurate, the other roles contain no known material error, and the statement matches the submitted version. Journals may ask the corresponding author to take responsibility for the contribution information, but collective review makes that responsibility workable.

Reopen the statement after a major revision. New experiments may add Investigation; a reanalysis may change who led Formal analysis; a junior author may take over the response and earn substantial Writing – review & editing. Record the change and circulate it again rather than silently editing metadata in the submission system.

Final submission checklist:

  1. The journal’s preferred CRediT format has been checked
  2. All 14 official definitions were available during role assignment
  3. Each assigned role is tied to actual work
  4. Authorship eligibility was assessed separately
  5. Non-author assistance is acknowledged and permission obtained
  6. Names match the title page, system and ORCID records
  7. Every author approved the final statement

A good CRediT author contribution statement is short because the difficult work happened earlier: recording contributions, applying authorship criteria fairly, and reaching agreement before submission.

Frequently asked questions

What is a CRediT author contribution statement?

It is a structured description of who contributed to a research output using the 14 roles in the Contributor Roles Taxonomy. Roles include conceptualization, methodology, investigation, data curation, formal analysis and two forms of writing. The statement makes work visible, but it does not by itself determine who qualifies as an author.

Does every author need more than one CRediT role?

No. CRediT does not prescribe a minimum number of roles, and one role can represent a substantial contribution. Authorship eligibility must be checked separately against the target journal's criteria. In journals following ICMJE recommendations, every author must also participate in drafting or critical revision, approve the final version and accept accountability.

Can two authors both claim the same CRediT role?

Yes. Roles are not exclusive, and collaborative research often has several contributors in investigation, methodology or writing. Where several people share a role, the standard allows an optional degree of contribution: lead, equal or supporting. Each publisher decides whether to request it, so use these qualifiers only when the journal asks for them, and never as proxies for author order or status.

Should acknowledgments use CRediT roles?

CRediT can describe anyone's contribution, including people who are not authors, but journal implementations differ. A person who does not meet the journal's authorship criteria should normally be acknowledged with permission and their work described accurately. Never add a non-author to the byline just because one CRediT role applies.

When should the team write the contribution statement?

Start the record when roles are assigned, review it when the first full draft circulates, and approve it immediately before submission. Update it after major revisions if new analysis, experiments or writing changed the work. A contemporaneous record is more reliable than reconstructing contributions at the submission deadline.

Ready to submit with confidence?

Use independent double-blind peer review and clear author guidelines.

Submit your manuscript